Variohm XPD Throttle Position Sensor 110 degree (Non-Contact)
Price:
$295.00
This model bolts directly to either end of any Jenvey throttle body in place of the TP11.
Features
8 mm D-Shaft Rotary Sensor
Hall Effect non-contact technology
Long life - extremely robust
Programmable angles from 20º up to 360º
IP68 protection
Selectable mounting options
Redundant output
Mechanical
Typical Life Cycle >50 million movements (restriction by mechanics)
Torque < 0.1 Ncm
Measuring range 360º redundant, signal 1 cw, signal 2 ccw
Housing High grade temperature resistant plastic
D-Shaft Nylon 66
Environmental
Operating temperature -40°C to +125°C (Short term 150ºC)
Vibration 5...2000 Hz; Amax = 0.75 mm;
amax = 20g to IEC 60068-2-6
IP rating IP68 (minimum)
Electrical
Supply Voltage 5V +/- 0.5V
Output signal Ratiometric 5%...95% of supply (+/-25mv of specified
electrical output range for both start & end voltage)
Independant linearity +/- 0.5% of each signal range
Isolation resistance 200 MΩ (500 VDC, 1 bar, 2s)
Repeatability <= 0.2% (dependent on mounting tolerances)
Electrical connection See ordering code/wiring diagram
Cable type Raychem Spec 55, 24 AWG
Sleeving - Raychem DR25