Airbox Kits
Carbon Fibre Cross Ram Airbox Kit 96-010A
Designed for cross ram ITB applications on many different V8's, these airboxes are spplied with undrilled backing plates which can be adapted to any suitable throttle body set up.
Backing plates can also be supplied drilled to your needs.
The finish is an RTM dry carbon finish. A gloss clear coat can also be supplied as an option.
$1,980.00
Airbox backing plate
A flat airbox backing plate for mounting any of the PXC600 series air filters to a pair of Jenvey throttle bodies. Comes unmachined but can also be ordered pre drilled to suit many popular Jenvey kits.
$77.00
Carbon Fibre Airbox Backing plate with 50mm recess
A light compact airbox base plate that gives more clearance for injector length or fuel rails on SF and SFD throttle bodies.
This part will need machining to fit your application.
$198.00
Jenvey Airbox Kit LS3
This kit includes a pair of machined carbon airboxes, TP1 throttle position sensor, coil pack mounting brackets and new breathers.
$2,739.00
Jenvey LS V8 Airbox Backing Plate Set
A pair of very light compact carbon fibre airboxes backing plates which are designed to fit the Chevrolet LS engine but can be used on just about any other V8 applications. Use with ABFLS1 airfilters.
$432.50
100mm Diameter replacement intake pipe for PX600 Air box
Replacement 100mm cold air feed pipe for PX600 air box. Can also be used for other ducting in competition vehicles. 1 metre length
$65.45
Replacement integral filter for PX600 air box
This filter is designed to replace the integral filter in the neck of a PX600 air box, if your filter is old or worn out this is the perfect item for you.
$53.79
Pipercross Airbox Kit Left Hand 100mm Inlet
Designed in conjunction with a leading kit car manufacturer, the PX600 air box is designed for road and competition use, where there is a requirement to reduce drive by noise.
Comes with internal air filter and flexible intake pipe.
$475.00
Pipercross Airbox Kit right hand 100mm inlet
Designed in conjunction with a leading kit car manufacturer, the PX600 air box is designed for road and competition use, where there is a requirement to reduce drive by noise.
Comes with internal air filter and flexible intake pipe.
$475.00
Pipercross Airbox Kit left hand 100mm inlet No Air Filter
Designed in conjunction with a leading kit car manufacturer, the PX600 air box is designed for road and competition use, where there is a requirement to reduce drive by noise.
$415.00
Pipercross Airbox Kit right hand 100mm inlet No Air Filter
Designed in conjunction with a leading kit car manufacturer, the PX600 air box is designed for road and competition use, where there is a requirement to reduce drive by noise.
$415.00
Pipercross V1 Airbox - BMW E92 M3
Carbon Fibre airbox to suit BMW E92 M3 V8. Comes with high flow Pipercross filter element.
$2,475.00