Shopping Cart

Product Search

Magneti Marelli SRTE Engine Control Unit

Brand: Magneti Marelli
Product Code: SRTE
Weight: 0.80kg
Dimensions: 20.00cm x 15.00cm x 5.00cm

Price: $5,600.00

Available Options

ECU Options:

SRT-E is a dedicated Engine Control Unit. A single SRT-E can drive up to eight injectors and six ignition coils. It is compatible with a wide range of sensors and actuators (especially F1 products) such as coils, injectors and sensors. SRT-E can also drive logic command coils (HW option).
Communication from the PC based configuration tool and to other units (such as dashboard and logger) is possible by 2 CAN lines and an asynchronous serial line.
Inside the unit there is a high performance RISC microcontroller and an FPGA for diagnostic purposes.
SRT-E provides analogue inputs for single-ended, differential, temperature and knock-sensor as well as an interface for a linear wide band lambda sensor. The unit also provides 2 HBridge output stages for use with suitable “Drive by Wire” or Trumpet Control actuators.
6 configurable speed sensor inputs (up to 3 inductive) provide full flexibility of configuration for engine angle detection as well as other frequency inputs such as wheel or shaft speed.
SRT-EDL is a version of the SRT E Engine Control Unit with an internal 64 Mbyte data logger.

 14 Single-ended
 3 Pick-ups or Hall effect
 3 Hall effect
 6 Inductive or logic command ignition drivers (HW option)
 8 On/Off injector drivers
 2 H-Bridge: DC-Motor driver for “Drive by Wire” control
 4 PWM
 2 Linear Lambda
 2 Knock input for detonation control accelerometers
 32 or 64 Mbyte internal data logger
 Up to 256 logged channels
 Up to 40 Kbyte/s logging rate
 Sampling rates up to 1000 Hz
 2 CAN communication buses
 1 Ethernet line

Inputs
Analogue Single-ended .................................................. 14
Linear Lambda sensor ...................................................... 2
Knock sensor .................................................................... 2
K-type thermocouple ......................................................... 2
NTC/PT1000 temperature sensor (selectable) ................. 4
NTC internal temperature sensor ..................................... 1
V battery injector ............................................................... 1
VR Pick-ups or Hall effect ................................................. 3
Hall effect .......................................................................... 3
Lap trigger ......................................................................... 1
“Code Load” enable pin .................................................... 1
Syncro (Iso9141) ............................................................... 1
Outputs
On/Off injector drivers ....................................................... 8
Inductive or logic command ignition drivers (HW option) .. 6
H-Bridges .......................................................................... 2
Lambda heater drivers ...................................................... 2
PWM ................................................................................. 4
Voltage references ............................................................ 3
Communications
CAN line (1 Mbit/s (*)) ....................................................... 2
Ethernet line (100 Mbit/s) .................................................. 1
Serial current loop ............................................................. 1
(*) Configurable on request

Logic Core
Microcontroller (80 MIPS RISC)........................................ 1
FPGA (50k gates) ............................................................. 1
Flash E2PROM (microcontroller) ...................................... 1 Mbyte
RAM memory (microcontroller) ....................................... 48 Kbyte
RAM memory ................................................................ 512 Kbyte
E2PROM ......................................................................... 64 Kbyte
Time keeper ...................................................................... 1
Logging
Flash disk memory ................................................. 32 or 64 Mbyte
Logged channels.................................................. up to 256
Logging rate ........................................................... up to 40 Kbyte/s
Sampling rate ..................................................... up to 1000 Hz
Other Characteristics
Power supply ........................................................... 7 to 16 V
Operating temperature range (internal) ................ -20 to 85 °C
Protection class ........................................................... IP 54
Dimensions
without connectors................................. 134 x 132 x 39 mm
Weight (approx.) ........................................................... 700 g

Make
Alfa Romeo