Shopping Cart

Product Search

Bosch Motorsport ABS M4 Clubsport Kit

Brand: Competition Systems
Product Code: BOSF02UV01289-49
Weight: 2.00kg
Dimensions: 40.00cm x 30.00cm x 20.00cm
Call for Price: +613-8743-5550

The ABS M4 kit is developed for the operation in front-, rear- or 4-wheel drive vehicles. A generic wiring harness is included in the kit. This enables us to provide the kit with a significantly reduced price in comparison to the standard ABS M4 kit with individual loom.

The ABS M4 is specifically adapted for motorsport use. Individual car parameters are calibrated with software free of charge. The vehicle is required for measurements to be taken by us for calibration.


  • Suitable for front-wheel, rear-wheel and four-wheel drive vehicles
  • Generic wiring harness to fit all engine bay and front foot well locations for the hydraulic module

Mechanical Data

Hydraulic unit with attached ECU Vibration damped circuit board

38 pin connector

2 hydraulic valves per wheel

2 brake circuits (front and rear)

2 hydraulic accumulators 3 cm3 /each

Standard fittings 2 x master cylinders M12 x 1 4 x brake cylinders M10 x 1

Size 125 x 80.3 x 129.6 mm

Weight 1,850 g

Operating temperature -30 to 130°C

Max. shock 50 g less than 6 ms

Electrical Data

Supply voltage 8 to 16 V, max. 26 V for 5 min

Max. peak voltage 35 V for 200 ms

Power consumption 8 W stand-by, 230 W in operation


4 active wheel speed DF11

Brake pressure (front brake circuit)

Longitudinal acceleration

Lateral acceleration

Yaw rate

Brake light switch

12 position function switch: • 9 maps preconfigured • 2 maps programmable • 1 switch position for ABS function OFF


ABS warning light (MIL)

Wheel speed on CAN etc.: see manual